Sunday, August 26, 2012

HOW TO NEARLY KILL A RADIO (Alinco DJ-X3)

Hello and welcome back.... Here's a small tip that nearly cost me my Alinco DJ-X3 (Radio Scanner), while out in the sun I took of my jumper and a mass of static zapped my radio, It (the radio) started having lockouts and was beeping and going nuts.....Lesson learnt, When taking off a jumper don't hold onto your radio.
A full reset did the trick BUT I lost all programed frequencies so many hours spent reprogramming is on the cards.
Could have been worse.

To reset a Alinco DJ-X3 = turn the power on while holding down the (FUNC/ENTER) key, the (BANK(1M/10M)) key, and the dial all at the same time

No comments:

Post a Comment