RADIO PROGRAMMING SERVICES AVAILABLE (Updated 23/01/24)

 Hello and Welcome Back... Radio Programming Services Available...

Good news if you own a Radio Scanner / 2-Way Radio and Don't Know How To Program It...

 

 

I offer a programming service for various scanner radios & Various 2-Way for models for NSW / Canberra Region Only (Australia)

SOFTWARE I USE

Sentinel / Freescan / Proscan / Tait / RT Systems / Chirp /

 

**  Radio Models That I Program **

UNIDEN 

UBCD396T
UBCD369XT
UBCD325P2
UBCD996P2 (Desktop)
UBCD436PT
UBCD536PT (Desktop)
USDS100
USDS200 (Desktop)

YAESU
VX-6R

BAOFENG
UV-5R / GT3 II (uses the 2 prong cable)
UV9RPLUS (uses the flat cable)

TAIT
T2010 (4CH)

** Radio (Uniden) Upgrades / Add Ons **

It is highly recommended that if you own one of these Uniden Scanners (996P2, 325P2, 436PT, 536PT, SDS100, SDS200) that you do a DMR & NXDN upgrade (through Uniden) as most of my Masterfile uses DMR & NXDN Frequency's

 

The Masterfile on offer is as follows =
 

** BANKS ** (Full Scanner Program)

01 = RURAL FIRE - inc Aviation (Helicopters / Aircraft), Fireground, PMR (Private Mobile Radio), NPWS (Nat Parks & Wildlife) & NSW Forestry

02 = PSN (Public Safety Network) (ex GRN (Government Radio Network)) - Ambulance, Fire & Rescue, RFS (Rural Fire), SES (State Emergency Service), Marine Rescue, VRA (Vol Rescue Assoc), NPWS, State Rail, RTA, & Heaps More..

03 = MEDICAL / RESCUE inc Air Medical, Community Medics, Surf Rescue (DMR enabled),     Hospitals, VRA & More

04 = LOCAL - Shopping Centres, Jails, Bus Companys,(DMR needed) AM / UHF CB, Badgerys Creek Airport, Entertainment Venues, Hillsong Church, Media, Security, and heaps more..

05 = SYDNEY AIRPORT - Main Airport Comms

06 = SYDNEY AIRPORT COMPANYS - REX, Qantas, Virgin, Swissport, Cargo/Freight & More

07 = LOCAL AIRPORTS - Bankstown & Camden, Wollongong, CTAF NSW Wide & More...

08 = MILITARY - Richmond RAAF, Williamtown RAAF, UHF Milcom & More..

09 = MARINE RADIO - inc Marine Rescue, Marine Traffic 

10 = TRANSPORT - Various Bus Companys (DMR Needed), Taxis, Trains inc Freight, Couriers, Sydney Ferries & More

11 = Orion Trunking Network - Connect Plus (DMR Needed) Bus Company's, Various Private Business & More

12 = Orion Trunking Network - Capmax Trunking (DMR Needed) - Various Business

13 = Orion DMR - Gencom (DMR Needed) - Mostly Central Coast Buisness

14 = Queensland (locked out)

15 = Motor Racing - Eastern Creek Raceway (Cars, Camera & Officials (DMR / NXDN Needed)

16 = Motor Racing - Bathurst Race Track (Cars, Camera & Officials) (DMR / NXDN Needed)

17 = FM Radio (good for testing antenna systems)

*some banks may not be programmed

 

WHY CHOOSE ME TO PROGRAM YOUR RADIO?

  

1. - I live in NSW... The Masterfile i give to you is the same one i use, I just modify the file for your needs, that way, if somethings not working, i will know about it.. Took me several months to build..

2. - I was the founder of the COW (Cell on Wheels) frequency list on PSN/GRN Network...

After searching for nearly 2 days, I found that the COW Portable systems to have a 'NSW Wide' assignment attached to them, which means if your tower goes down for maintenance, the COW system will kick in & because my MasterFile includes all NSW Wide COW frequencies, you will be able to continue to listen...

 

3. - I was the person who worked out settings for the 436PT that need to be changed in order to receive the PSN/GRN properly, settings to be more sensitive 

4. 40 year experience with Radio Scanners

 

**  HOW MUCH DOES COST TO PROGRAM? **

Option 1.. $50   (Post MicroSD Card)  (436PT, 536PT, SDS100, SDS200)
This gets a Micro SD card sent to your address
Please give me a 24 - 48 hours to modify the Master File, Transfer to Card and Post (I will send you a email with your backup File)
The card will be tailored to your area, all you have to do is plug the card into the radio and away you go.


Option 2.. $50   (Meet Me)  (396T / XT, 436PT, 536PT, SDS100, SDS200) (Springwood NSW & Surrounds)
This method requires you to meet me at Springwood (or close by) and i will supply a Micro SD (if needed) with the Masterfile that is tailored to your area, i will then install the card / Program in your radio for you.
It can take about 5-20 Mins to do.
You can then enjoy the rest of your day..

 

Option 3... $40 - (Email)  Masterfile Sent Via Email with step by step detailed instructions (Suits Radios that use Freescan Program (396t / 396xt / 325p2) (You will need Freescan Running on your computer)

Or Sentinal  (436pt, 536pt, SDS100, SDS200) (You Copy the File to your Card)

Or Proscan (396xt, 996p2, 325p2) (You will need Pro-Scan Running on your computer)

For this Email version, you will need a Data Cable / Software that (hopefully) came with your radio.

 

Option 4... $35 (Meet Me) (Baofeng Radios)   (Springwood & Surrounds)

80ch UHF CB setup / Fireground / Marine 

Option 5... $40 (Meet Me)  (Yaesu VX-6) 

Meet me to Program - 80ch UHF CB / Fireground / Marine / RFS Air / Sydney Airport / Local Airports (Camden - Bankstown), Military (Richmond - Williamtown) or ALL Banks Option

 

Option 6... $20 (Meet Me)   (TAIT RADIOS)

Meet me with the frequencies you require to program your TAIT T2010 Radio, don't forget if input frequency is different to output frequency, you will need both.

 

 

Option 7 - $25 Email Update /$35 for Card Posted - NOTE = Must Be a Previous Paying Customer With The Same Radio

Update your years old file to new and exciting updated Masterfile 

The new file will be emailed to you with detailed instructions

 

**NOTE = PAYMENT IS TO BE MADE BEFORE PROGRAMMING as I have spent time programming only for people not bother to turn up...This way, It Slots you into a time frame and gets programming Started.

 

 

*** HOW TO PAY  ***

1. Using this Website, Click on the 'DONATE' tab on the top right corner of this page below "Shout Me A Coffee" & Deposit the correct amount

This Method uses Paypal, you don't need an account and takes about 30sec of your Time

 

2. In the Notes section in 'Paypal', please state the its for 'Radio Programming', and an address if sending Micro SD Card & Area of Listening

Please allow 24/48 hours for the instructions and Masterfile link to be emailed to you. (i have 4 kids so things get hectic at times) also it gives me time to find frequencies for your area. 
Make sure you put your address in the notes section

 

CONTACT = michael-bailey1708@hotmail.com

 

*Disclaimer - I offer this service AS IS, meaning... i don't claim that its 100% correct, as whats good for me, may not be good for you.. (so far no problems :). I am not a professional, just a fellow hobbyist.

The setup is designed to get you started and then you can add, modify or delete to make it your own.
This file is the same one i use so i know it works but sometimes things change.
Please have patience as i will endeavor to fix any problems that should they arise.

Hope to Hear From You Soon..

Michael..

#Uniden

#programradio

#programscanner

#radioscanner

#radioscannerprogramming

#ubc126at
#ubcd396t
#ubcd369xt
#ubcd325p2
#ubcd996t
#ubcd436pt
#ubcd536pt
#usds100

#usds200 

#tait

#yaesu

#baofeng

 

Terms & Conditions, Please note = No refunds issued for Masterfile Email / Post Version. Its up to yourself to have the technical knowledge to apply the Masterfile that has been emailed /Posted to you. The Masterfiles are the same as i use so i know they work and have been verified as working. 

The step by step instructions are a guide only. 

Also note, its not up to me to teach you how to work your scanner. i will try and help as much as i can but its up to you to learn how your scanner works.

For an easy to read scanner manual for the 436PT =  http://new.marksscanners.com/536/436_536.shtml

For an easy to read scanner manual for the SDS100 = http://new.marksscanners.com/SDS/100_200.shtml

For an easy to read scanner manual for the 325P2 = http://new.marksscanners.com/325/325.shtml

I do offer a service where as i can program the radio for you if you send by post at no extra cost. please include a return traceable bag. No responsibility taken for damage in transit.

Michael @ NSW Radio & Communications