Friday, November 25, 2016

PROGRAM YOUR SCANNER IN 15 MINS

Hello and welcome back... Had Alot of people say that the new scanners from Uniden are very hard to program.

They would be correct.

I have been using radio scanners since i was 16 (im now 45) and it still took me nearly 4-6 months to nut out how my Uniden 396xt worked.

It used to be the old bank system and you could enter in your frequencies in banks of 20 or 50 and then press scan and bingo, it worked..

But not any more.

The way to describe the new system is sort of like a computer database using main folders, then sub folders inside of the main folder.

I like to make my scanner as easy as possible to scan so that when an emergency or something of interest happens, i'm prepared and not fighting with the radio to get it to work properly.

I have spoken to a gentleman who has had his radio for 4 years and didn't know how to program this beast. (I recently programed it for him)

Which is why i've decided to release my database to others, so that they can get on with listening to their radios and not be frustrated because its not picking anything up.
Seriously, with these radios, you only need one setting out and it wont work properly (as i have found out by experience)

The way i have my Uniden UBCD396XT set out is in 10 banks.

The set-out is as follows =
BANK 1 - Bushfire
            2 - NSW GRN
            3 - Medical / Rescue
            4 - Blank / Marine
            5 - Sydney Airport
            6 - Local Airports
            7 - Military
            8 - Local
            9 - FM Radio stations
            0 - 80ch UHF CB

This table above (banks) represent 30 years of radio listening. The frequencies i have in these banks are a collection of personal listening, hours of searching ACMA databanks and RadioReference website.
Settings are my own trial and error as the instruction manual is pretty bad.

I'm not saying that what i've got is perfect but it seems to work (i have used this database for some customers and feedback is excellent)

An in-depth view of the banks are as follows...

BANK 1 - BUSHFIRE
Covers NSW Rural-Fire Fireground channels (VHF & UHF) and Aircraft Support inc Rural Fire, NPWS & NSW Forestry.
(update) PMR Chs now included
The air channels are a lifeline, they offer so much information.
A birdseye view so to speak.
You can hear the pilots of various helicopters and aircraft discussing the fire behaviour, who's doing what and where breakouts are occurring long before media know about it.
Fireground is sometimes limited to local areas only, but if there's a fire in your neighbourhood, you will want to be listening to these channels.

I like to keep this bank to a minimum so scanning is swift (you don't want to be stuck on some data ch when a fire is headed your way)

BANK 2 - NSW GRN
GRN covers Ambulance, Rural Fire, SES, Fire & Rescue (NSW Fire Brigade), plus several other agencies.
Towers can be modified to your local area.

BANK 3 - MEDICAL / RESCUE
Westpac Rescue, Marine Rescue, Air Ambulance, Hospitals, Fire Brigade back chs (used in car accidents, etc, etc) and lots more.

BANK 4 - BLANK or MARINE/MARITIME
Used for searching / monitoring new frequencies or can load full Marine channels band

BANK 5 - SYDNEY AIRPORT
As the name suggests, Sydney Airport (Kingsford Smith) freq inc Tower, Depart, Approach, Helicopter ch, Aircraft companys (if there is a problem with an aircraft, you will hear about it on their company channels)

BANK 6 - LOCAL AIRPORTS
Sydney local airports inc Bankstown (tower, ground, clubs), Camden (tower, ground, gliders) and other freq of interest.
Can be modified to your local area

BANK 7 - MILITARY
Richmond RAAF freq (Tower, ground etc etc) Holsworthy & Glenbrook aviation freq, Skynet.
Can be modified to your local area... Eg Williamtown

BANK 8 - LOCAL COMMS
STA Buses, Westfields, State Rail, Taxies, etc etc
Can be modified to your local area

BANK 9 - FM RADIO
Just about every Sydney FM Radio station inc WSFM, Smooth 95.3, 2ST Nowra (comes in on a good day).. about 20-30 channels also ATIS airband channels (Sydney, Bankstown, Camden)

BANK 10 - 80Ch UHF CB
Useful if you travel alot (listen to truckies) also used in bushfires when fireground is unavailable.

NOTE = For Airband Enthusiasts banks 5,6,7 can be used with everything else locked out... Very useful.

As stated most frequencies can be tailored to your area, if you don't live in Sydney or surrounds.

NSW & Canberra Only & Windows based only (sorry)

COST = $35 (Email Master File with instructions)
              $50 meet me (if you live / travel around Blue Mountains and i will do it for you..Takes 15mins)

If your interested, please deposit $35 into my 'Shout me a Coffee Fund' In the notes section, please state the its for 'Radio Programming',
Also send an Email with your name and what area your from and any other freqs of interest (eg Maritime, VHF Police) so i can tailor to your area.
Please make sure your name matches the 'Shout me a Coffee' and Email being sent.

Please allow 24/48 hours for the instructions and link to the file to be emailed to you. (i have 4 kids so things get hectic at times) also it gives me time to find frequencies for your area.

I use FREESCAN Software, so the file will be in that format.

PLEASE NOTE = Sadly Sydney Police (and surrounds) are using digital encryption and cannot be scanned but small pockets of analogue are still available in country areas (MT VIC - Blue Moutains is one area) that can still scanned but its very limited but will be added to your file if available.

You will need a data cable that (hopefully) came with your radio.

This is the same file that i use personally (for Uniden UBC396XT) so i know it works... Also if i update any frequencies, i will send you the new file free of charge.

I offer this service as is, meaning i don't claim that its 100% correct, as whats good for me, may not be good for you.. (so far no problems :)

If you have a problem please email me and let me know because it may be something that i have overlooked or hadn't thought about.

The 15min claim is for customers who already have Freescan software up and running and have successfully connected their scanner with this software.

STEPS INVOLVED

1. Clear / reset your radio
2. plug your radio into your computer while the freescan program is running.
3. Freescan can talk / control your radio
4. upload the purchased file into your radio
5. adjust settings to your liking
Enjoy your programmed radio

CHEERS

Michael Bailey

michael-bailey1708@hotmail.com

#Uniden
#UBCD396
#ubcd396xt
#UBCD325P2



2 comments:

  1. Hi Michael will this program work for the uniden ubcd436-pt

    ReplyDelete
    Replies
    1. hi, sorry.. the freescan software does not support the 436 & 536 based scanners.. Yet.

      Delete

Note: Only a member of this blog may post a comment.